Following safety and health rules is a challenge for any worker. There’s a lot to learn and remember about federal standards, company policies and task-specific protocols. Imagine how much harder all this must be for those who know little or no English in a workplace where almost no one speaks their language. It’s also tough for those who must train and manage these workers, and for those responsible for their safety and health.
What are
the safety-related challenges that arise from language and culture differences?
Why has the issue taken on greater importance than in the past? And, what are
some organizations and employers doing to identify and solve the problems? Those
are among questions asked and answered in this compliance report.
Soup…Salad
…Whatever!
The
familiar metaphor of
A few
years back, then-acting OSHA chief R. Davis Layne addressed the subject of
safety and the multi-ethnic workforce. He told the American Bar Association’s
Committee on Occupational Safety and Health Law that effective training will be
the key to overcoming barriers posed by non-English-speaking workers. Layne
highlighted the seriousness of the situation when he told the group about a
worker who was struck by the boom of a machine he was operating during the
demolition of an office building. The worker left the machine while it was
running, after having inadvertently pressed the boom control pedal. Layne
explained that the safety instruction book was written in English, but the
employee only understood Polish.
Layne
noted a 40 percent hike in Hispanic fatalities in the construction industry, and
pointed to a high rate of illiteracy among many non-English-speaking workers,
which further complicates safety communication and compliance. Problems also
arise in the course of OSHA inspections if employees are unable to describe
working conditions, or if translators are not available to interpret. OSHA has
promised to do more to reach out, especially in
Meet Joseph
McFadden
Joseph
McFadden, the president of McFadden & Associates in
One of
the primary problems that faced the hospital and its safety director was
assuring these workers that if they made a mistake, they would not be deported
as a result.
“They
would tend to hide injuries and make themselves sicker, and we didn’t want this
to happen,” recalls McFadden.
Most of
the foreign workers were not highly educated and found work in less desirable
areas of the hospital including housekeeping, the laundry, foodservice and
material handling. There, they encountered considerable risks, including
exposure to chemicals and ergonomic hazards.
Consider Root
Causes
A serious
training deficiency was illustrated by the case of a Thai worker employed at the
hospital. Using pantomime and color-coding strategies, the man had been trained
to operate a deep-extraction carpet-cleaning machine, including filling the
equipment with the required cleaner. A most important lesson was to use warm
water, rather than hot or cold. The worker, assigned to the “graveyard” shift,
appeared to be trained. He was on duty soon after a major snowstorm hit the
area, which took a big toll on the hospital’s many carpeted areas. The Thai
employee was eager to do a good job in view of the super-dirty carpets and, on
his own, decided to use hot water, which he believed would have greater impact.
As well, he added three “squirts” of the chemical cleaner, rather than one, as
required.
“What we
hadn’t taken the time to teach him was that the hotter the water, and the more
chemical, the more fumes are produced. Suddenly, we had fumes overpowering staff
and patients, and causing an entire wing to be evacuated,” says McFadden.
McFadden
took the position, contrary to that of some managers, that the employee did not
deserve to be fired for his error. Rather, McFadden began to look more deeply
into what had happened and why. Apart from insufficient training, he discovered
other root causes. Because of the late hour, few supervisors were on duty at the
time of the incident. In order to ask a question, the worker would have had to
page or phone the supervisor on duty in a separate part of the hospital. But
McFadden believed the worker had not been trained to use the phone and pager
system. Even had he been able to call, there was little certainty that he could
have made his point verbally.
Upon
further investigation, McFadden learned that in Thai and other Asian cultures, a
worker does not bother a boss except for extremely serious reasons (which this
worker did not perceive). Employees are shown how to do their tasks, and are
expected to perform them with few questions asked.
Awareness and
Action
Over the
years, McFadden has developed strategies that help employers understand the
problems they face and take proactive steps to avoid the kinds of problems
experienced by the
Many
employers ask him if they can have an untrained non-English-speaking person do
something simple, such as sweep the facility. But what happens when the sweeping
task takes the worker near hazardous materials that could spill, or takes him
under stacked items that may fall? Every task, no matter how simple or by whom
it’s performed, should have a job hazard analysis, according to McFadden. He
also speaks with employers about the importance of having labels and material
safety data sheets in a language that employees can understand. And, he reminds
them that the fact that an employee appears to be able to speak English does not
mean he or she can read and write it. That also holds true for the workers’ own
language – many who seek and find work in the
McFadden
explains that a factor that can make training especially costly is that it must
be repeated frequently to accommodate the high turnover frequent at lower levels
of employment where non-English-speaking workers are often found.
Sharing the
Knowledge
Among
other successful ideas and techniques he passes on to his clients,
McFadden:
-
Pairs a
new, non-English-speaking worker with a seasoned employee. This helps the
newcomer learn safety rules and language and promotes cultural understanding
between the workers.
-
Suggests
that employers select some non-American holidays celebrated by employees and
organize workplace observances. This gives employees from other countries the
feeling that their culture is respected and better understood by others.
-
Reminds
employers that when employees are faced with differences, they sometimes resort
to horseplay and practical jokes, gestures that can lead to serious injury.
Human resources and safety professionals should work together to root out such
behavior.
-
Conducts
safety training in both English and the language of the native speakers, using
translators. McFadden also makes liberal use of visual aids to demonstrate
hazards. For example, to illustrate the importance of goggles, he uses a “head”
form he purchased from a beauty supply shop. He places safety goggles on the
head and splashes pretend acid (colored water) on it. When the goggles are
removed, the students can see how well they protect.
Avoiding
Culture Clash
Translating safety manuals and procedures into another
language is essential, but it doesn’t get at the problem of cultural differences
that so strongly influence how employees hear information and what they do with
it. It’s an extremely important consideration in job safety, says Dr. Jivan
Saran, professor of safety and science technology at
“Most
people believe that safety is safety, whether you’re in
Saran
says that whereas many employers understand that linguistic differences can
affect safety, they’re far less aware of the impact of cultural differences. For
example, some ethnic groups are more likely to respect older than younger
people, a factor that should be understood when selecting a safety trainer.
Saran believes that Americans are less concerned with age, and more concerned
that the person in front of them demonstrates authority. He also observes that
societies differ considerably in gender-related areas. Some cultures are
strongly matriarchal or patriarchal, differences that should be considered when
training and managing employees. Among some peoples, machismo is a strong factor
and can influence whether a worker will wear protective equipment or take unwise
risks.
Watch Your
Tongue!
Both
Saran and McFadden encourage employers to select their translators carefully.
They must be highly aware of nuances and shades of meaning. The English word
“safety,” for example, loosely translates into Spanish as “seguridad,” which
also means security.
“In this
country,” says Saran, “when we refer to ‘safety,’ we could be talking about the
safety of our bank accounts, or the importance of ‘being safe by choosing the
right deodorant.’”
Last
year, Saran was on a business trip in
Construction
Industry Builds Bridges
Probably
the most impressive progress in overcoming language and cultural barriers has
been made toward Hispanic workers in the construction industry – and for good
reason. One government estimate suggests that the Hispanic workforce in the
Safety
director John Dusch told The Arizona Republic: “We realized we had a problem.
The fact that we were not able to communicate with our employees was affecting
our productivity and, most importantly, our safety records.”
In
addition to the classes for managers, MKB is planning an English class for its
Spanish-speaking workers.
Added
Dusch: “It’s a whole different culture out there, in
In
Florida
Power & Light (FPL) is providing voluntary English classes for Hispanic
construction employees at its
Certified
instructors from
Speak the
Language of Safety
Those
interviewed for this article and other experts reiterate that employers must do
all they can to respect differences among employees and encourage
English-speaking workers to do the same. When that happens, the result is a more
positive, more productive workplace where people feel good about one another and
take safety – their own and that of their fellow workers – more
seriously.
About the
Author:
This article provided by TrainingOnline.com, an e-learning division of Business and Legal Reports Inc. and a publisher of quality compliance, training and productivity tools for the workplace. For more information on the company’s range of products and services, visit www.TrainingOnline.com.