An important goal with contractors is to turn a few of them into team members. They can help with all kinds of decisions relating to maintenance (particularly during shutdowns). To foster the partnership, allow these contractors to make some profit on your work. As team members and over time, they will look out for your interests when you are not around.
Even when the craft is in-house, continue to occasionally use other contractors. This acts as a check and balance on the team member to see if the pricing, quality or delivery has drifted out of line.
The degree of outside contracting has no impact on your need for a preventive maintenance system, for effective root cause failure analysis or for a responsive organization. Even with good contractors, the manager needs to be involved in the RFCA and PM activity.
Types of work commonly contracted:
The best managers balance their needs for work with the true overall economics.
15 reasons to hire a contractor:
Nine reasons not to hire a contractor (common concerns):
Tips from people in the trenches to make contracting go smoother:
Define the work to be contracted. The better the definition at the early stages, the better the job will go. Avoid loose specifications (on both materials and work to be done).
Along with No. 1 above, communicate your ideas to the contractor. Make sure they understand. Was there a meeting of the minds? Discuss the quality of materials needed.
Negotiate and award the contract. On larger jobs, check out finances, credit, insurance and staff. Visit other jobs to see their quality, and call references. Of course, don’t lose track of the contract documents. Keep a fair and complete set of contract documents.
Be aware of and avoid, if possible, low-ball bids. Negotiate a schedule of extras. A common ploy is to low-ball the bid to get the job and flood the company with small extras. Add in for clauses like “all extras not included in the original price have to be agreed to in writing prior to the commencement of the work.”
Be sure to spell out deduction clauses in the contract. Spell out what you will charge back and when you will charge it. Examples would be debris removal, clean-up and missing firm completion dates.
Negotiate cancellation clauses. You need to spell out how and why you can cancel the contract. Otherwise, you may find yourself with a mechanic’s lien over an inadequate job after you did not pay the final payment.
On ongoing service bids, avoid both too short of a contract term and too long of a contract term. If the term is too short, then the contractor will chart excessively for mobilization costs. If the term is too long, you might be stuck with a barely adequate vendor with no easy way to improve the situation.
Be as complete as possible about responsibilities, who supplies what, where to unload, site rules (safety, user contact, clean-up, security, keys, etc.). There should be statements about how the site is to be left at the end of each work day. Who is responsible for locking up, barricades, traffic management, cleaning and debris removal? The agreement should also include who is responsible for municipal permits and plans.
Inspect contractor’s insurance policies. Have an agreement about what happens when (if) the contractor damages your property (or worse yet, damages a neighbor’s property who then might sue you; or it might spoil a good relationship). Require an up-to-date certificate of insurance covering: general liability, casualty (property damage), workman’s compensation, auto liability, and if they did the design malpractice and errors and omissions. The smallest contractors (sole proprietors) don’t need workman’s comp. Check with your attorney or your insurance professional.
Define performance and what a good job would look like. Add a clause such as “all work is expected to be done in a professional and workmanship manner. All work will be in compliance with applicable city building codes.”
Prepare the area to be worked on. Remove as much as possible to avoid breakage and theft. If indicated, isolate area so contractors have no reason to wander around.
Manage the contractor. Keep a record of the job as it unfolds and provide feedback. Perform frequent inspections and document results. Have a functional planned schedule and compare progress to projections. Problems should be identified as early as possible.
Manage agreements about amounts of payments to be made, when, etc. Avoid sloppy record-keeping. Require paid receipts to prove subcontractors and material vendors have been paid. Get a release of all lien forms signed before last payment. If you don’t, you could have paid off the general contractor and still be hit with liens from unpaid subs. Consult with your legal department about lien laws in your state, and be sure you are covered.
Resolve disputes promptly. Avoid endless delay in resolution of disputes or you’ll end up in court.
Evaluate each contractor on a regular basis for quality, service, cost and fulfillment of contract terms. Write up a short narrative to put into the file regarding how the job went.
About the author:
Joel Levitt is a leading trainer of maintenance professionals. He has trained more than 10,000 maintenance leaders from 3,000 organizations in 20 countries in over 500 sessions. Since 1980, he has been the president of Springfield Resources, a management consulting firm that services all sized clients on a wide range of maintenance issues. He has almost 25 years experience in many facets of maintenance, including as a process control designer, source equipment inspector, electrician, field service technician, merchant marine worker, manufacturing manager and property manager. Prior to that Levitt worked for a CMMS vendor and in manufacturing management. To learn more, visit www.maintrainer.com or call 800-242-5656.